On 12 May 2008, a magnitude 7.9/8.0 earthquake struck China, approximately 80 km west of Chengdu in the Sichuan (Wenchuan) province and 1550 km southwest of Beijing. This event occurred on one of the faults that run along the base of the Longmenshan Mountains marking the boundary of the Tibetan […]
Design and Construction of a Modern Post-tensioned Parking Structure
The parking structure on the California State University, Sacramento, campus comprises two connected six-story units, totaling approximately 1 million square feet and 3,000 stalls. Figure 1 is a recent photograph of the structure, looking east. International Parking Design was the architect of record, and Miyamoto International was the structural engineer […]
Next Generation Performance-Based Earthquake Engineering for Steel Moment Frame Buildings with Dampers
Steel Special Moment Resisting Frames (SMRFs) with Viscous Damping Devices (VDDs) have been used by authors for design of many new and retrofitted buildings. Design experience has shown that such combination is reliable and cost effective, with a higher confidence in meeting the performance levels than the conventional design. The […]
Survey Of Damaged School And Hospital Buildings In The 2008 Wenchuan Earthquakes, Retrofit Options, And Application To Turkey
On 12 May 2008, a magnitude 8.0 earthquake struck China, approximately 80 km west of Chengdu in the Sichuan (Wenchuan) province and 1550 km southwest of Beijing. The fatalities exceeded 70,000 and millions were injured or left homeless. Damage was estimated at over US $150 Billion. Thousands of unreinforced masonry […]
Current Implementation Practices Of Passive Energy Dissipaters In The United States
Performance based design (PBD) and a system of steel special moment resisting frames with viscous damping devices were used for the seismic design of two new multi-story midrise buildings in California. The first structure is located in Los Angeles Basin, in a region of high seismicity. The second building, which […]
Enhancing Sustainability of Structures: Retrofit of a Historic Building Using Energy Dissipation
Energy dissipation was used to retrofit a historic high-rise reinforced concrete building in California. The building was constructed in the 1920’s and was the first high-rise structure in the state capital. It has 14 stories and a basement. The building is a California registered historic structure, and has many important […]
The 2007 West Sumatra Earthquake: Seismic Hazard Mitigation In Developing Countries
Seismic hazard mitigation in developing countries is critical since even moderate earthquakes adversely affect many lives. On March 6, 2007, a magnitude 6.3 earthquake hit the Indonesian island of Sumatra. This moderate event caused 70 fatalities and 500 casualties, caused 130,000 displaced people, and severe damage or collapse of nearly […]
Seismic Evaluation and Upgrade of Historic Multi-Story Buildings in Sacramento, California
Structural performances of two historic high-rise buildings, constructed in the early 1920s and located in seismic zone 3 in downtown Sacramento, CA were investigated. The objectives of this evaluation were to determine whether these structures met the current seismic criteria and to propose strategies to upgrade such performance to an […]
Seismic Retrofit of a Hospital Building Using Fluid Viscous Dampers
Seismic performance of a multi-story hospital structure located in Southern California was evaluated using performance-based earthquake engineering. The uppermost eight stories of the superstructure use steel framed construction, whereas reinforced concrete framing is used for the lowest floor (L2) and the four sub-grade parking stories. The building is rectangular in […]
U.S. Experience – Seismic Rehabilitation Of Historic Structure With Dampers
The 145,000-sf (13,470 m2) building, built in 1910, is a torsionally nonsymmetrical structure comprised of a six-story portion adjacent to a two-story portion. The building is located in Northern California. There was significant concern that the building will not be able to withstand the level of earthquake shaking expected at […]